Workstation Kit of Parts
In the open plan, freestanding furniture and space-efficient workstations allow people to focus but also to move, gather, and collaborate. All workstations are smart and connected, with ample wire management, technology, and connectivity a central design consideration.
6-Pack Workstations
These workstations feature the hiSpace Quick Connect height-adjustable table. Height-adjustable surfaces let you sit or stand—it’s your choice! Need storage and extra seating? There’s a freestanding credenza with a seat cushion. The desk-edge clamped Power Qube lets you charge up devices, you’ve got a Swerv HD monitor arm, plus desk-attached screens that add just the right amount of privacy and separation.
District Power Spine with left and right duplexes and one data opening per user.
(72"W x 29"H).hiSpace Quick Connect height-adjustable table with radius corners, vertical and horizontal wire management, undersurface-mounted power strip, and extended height range. (29"D x 68"W x 22.6" – 48.7"H).
Curved, full-fabric desk-edge screens. (51"H datum).
Laminate mobile storage with box/file, fitted seat cushion, and recessed pulls.
(16"W x 19"D x 21"H).Desk-edge clamped Swerv HD monitor arm.
Desk-edge clamped Power Qube.
Sanna Light Bar (optional)
hiSpace Quick Connect Table
-
General Operation
Press and hold the UP or DOWN arrows to move the desk to the desired height.
Memory Positions
To store a surface height in the memory, follow these steps:
Move the desk to the desired height.
Press and release the M button. Then press and release the desired memory position button (1, 2, or 3) within 10 seconds. Your first position is now saved.
Repeat steps A and B to store up to two additional heights.
To move to the positions saved in the memory, press and hold the memory position button (1, 2, or 3).
The desk automatically stops when it reaches the preset height.
Any or all of the memory heights can be changed at any time by following step two.
-
Initialization Procedure
Press and hold the UP and DOWN buttons together for at least 10 seconds.
Continue to hold both UP and DOWN buttons together. The desk will move to the lowest position and either rebound slightly or click. Initialization is complete.
Change the Display Units
To switch the display between inches or centimeters, press and hold the M button while simultaneously pressing and holding the DOWN button for 10 seconds.
Verification of Display and Desk Height
Adjust the desk to the lowest position and measure the height. Press and hold the M button while simultaneously pressing and holding the UP button for 10 seconds. The first number will flash. Using the UP or DOWN button, set the first digit. Press M again and the second number will flash. Repeat to set the second and third digits.
Locking a Lowest Position
Adjust the desk to the lowest desired height. Press and hold the M button while simultaneously pressing and holding the 1 button for 10 seconds. The letter L will display, confirming the position has been locked and the desk will not adjust lower than this height.
Unlocking a Lowest Position
Adjust the desk to the lowest desired height. Press and hold the M button while simultaneously pressing and holding the 2 button for 10 seconds. This will unlock the lowest height position set.
-
The Desk Will Not Adjust, Moves Too Slowly or Moves in the Wrong Direction
Check that the power is connected properly at the control box and at the outlet. Re-initialize the desk. If there is still no response, please contact your supplier.
The Desk Moves Up on its Own
Press the UP button to stop the desk from moving. Re-initialize the desk. If there is still no response, please contact your supplier.
The Desk Moves Down on its Own
Check if the weight on the desk exceeds 200lbs (90kg). If so, remove items to reduce weight maximum to 200lbs (90kg). Re-initialize the desk. If there is still no response, please contact your supplier.
